THDY-10 series silicon rectifier charge (discharge) machines adopt three-phase fully controlled bridge rectification; equipped with industrial-grade touch screens, English display, real-time status. It not only has a complete human-machine interface, user-friendly operation, and clear display but also powerful functions, integrating multiple working modes such as charging, discharging, cyclic charge-discharge, pulse, and temperature compensation. The touch screen is 7 inches.

No phase sequence requirement for the power grid: A, B, C three-phase input can be connected arbitrarily (during initial debugging, if the charger reports phase sequence fault, adjust any two input lines);

Automatic shutdown if the charging connection line falls off during charging;

Once the charge/discharge parameters are set, if charging/discharging the same battery in the future, it only requires confirmation without resetting;

Equipped with pulse charging function (can activate lagging batteries), pulse width and amplitude are adjustable and configurable;

Equipped with temperature compensation function, i.e., the charger can adjust the charging voltage according to environmental temperature changes and battery characteristic curves;

Energy feedback to the grid during discharge, clean and environmentally friendly;

Users can view all process parameters during charge/discharge operations to avoid misoperation;

Equipped with power-off storage function, automatically resumes to the working state before power failure, enabling unattended operation;

Pause function ensures continuous operation;

Supports multiple operation modes: manual operation, computer control, touch screen control, PC operation.

This silicon rectifier power supply can be used as a charge-discharge machine or as a high-power power supply.